[Sony] Wireless FTP Upload from an iPhone
Connect your camera to your phone's personal hotspot, and use the camera's FTP function to transfer photos from the camera to the UPHOTO cloud.
Supported cameras: Sony cameras with Wi-Fi and FTP functions
TIP
Automatic FTP upload transfers only photos taken after the connection is established. To upload photos taken earlier, see the manual FTP upload instructions under "Common Issues and Solutions" below.
I. Phone Settings
1. Check and Change the iPhone Name
In Settings → General → About, change "Name" to use only letters and numbers. Do not use Chinese characters, spaces or special characters. This name is also used for your Personal Hotspot. See below:

2. Turn On Personal Hotspot
In Settings → Personal Hotspot, turn on "Allow Others to Join". See below:

If a "Wi-Fi is Off" prompt appears, select "Turn on Wi-Fi". See below:

Note: Use only letters and numbers in the personal hotspot password; do not use spaces or special characters. On a 5G-capable iPhone, turn on "Maximize Compatibility". See below:

II. Find the FTP Server Information
Open the UPhoto app and sign in.
In the app’s album list, select the album and tap "Upload Now".
On the shoot-and-upload or local upload page, select "Wireless FTP Transmission".

After selecting an upload group, open the "Shoot and Upload" screen.
Note: The first time you use UPhoto, the app may ask to find and connect to devices on your local network. Tap "Allow". See below:

The first time you open the upload screen, "FTP Service Information" appears. You will need it to configure the camera. To display it again later, tap "FTP Transfer". See below:

Note: If the app cannot obtain an IP address, turn Personal Hotspot off and on again. Return to the app’s album list, then reopen the FTP upload screen.
III. Camera Settings
Set the camera’s auto power-off time to the longest available setting to keep it on. See below:

Set the photo format to JPEG or JPEG+RAW.
Set the camera date and time to the current date and time.
Set "Wi-Fi Settings".
4.1 Find "Wi-Fi Settings" in "Network". See below:

4.2 In the "Wi-Fi Settings" screen, select "Access Point(Manual)" and confirm. See below:

4.3 Select the previously enabled "Phone Personal Hotspot" and confirm, then enter the password of the "Phone Personal Hotspot" and confirm. See below:

4.4 Set "IP Address Setting" to "Auto", set "Priority Connection" to "On", and then confirm. See below:

4.5 "Registered" indicates that the camera is connected to Wi-Fi. See below:

Set "FTP Transfer Func.".
5.1 Find "FTP Transfer Func." in "Network". See below:

5.2 In the "FTP Transfer Func." screen, set "FTP Function" to "On", select "Server Setting" to open it. See below:

5.3 In the "Server Setting" screen, select an unused server setting to open it. See below:

5.4 In the "Server" screen, set the "Display Name" to a name that is easy for you to remember, and then select "Destination Settings" and confirm. See below:

5.5 On the "Destination Settings" screen, enter the IP address and port shown in UPhoto under "Host Name" and "Port". Set "Secure Protocol" to "Off", then confirm. See below:

5.6 Back on the "Server" screen, select "User Info Setting" and confirm. See below:

On the "User Info Setting" screen, enter the username and password shown in UPhoto under "User" and "Password", then confirm. See below:

Confirm on the "Server" screen.
Back on the "Server Setting" screen, select the server you just configured and confirm.
In the "FTP Transfer Func." screen, if it shows "Connected", it means the connection is successful. See below:

In the "FTP Transfer Func." screen, set "Auto Transfer during Shoot" to "On", set "RAW+J Transfer Target" to "JPEG Only", and set "FTP Power Save" to "Off". See below:

IV. Shoot and Upload
Photos you take are automatically transferred to the photo list in the UPhoto app.
Common Issues and Solutions
The camera cannot start the FTP transfer function.
- Set "Ctrl w/ Smartphone" to "Off".
- On some Sony cameras, "USB Connection" must not be set to either "MTP" or "PC Remote".
Manually select photos to upload via FTP (using the Sony a7M3 as an example).
2.1 Find "FTP Transfer" in "FTP Transfer Func.". See below:

2.2 In the "FTP Transfer" screen, set the conditions for photos to be uploaded, and then confirm. See below:

The camera is connected, but the app cannot recognize its photos.
- Check that the camera’s photo format is set to JPEG or JPEG+RAW.
- Back up the memory card, then format it, take a new photo and try again. Formatting erases all data on the card.

