Skip to content

[Canon] Wireless FTP Upload from an iPhone (using the R6 as an example) ​

Connect your camera to your phone's personal hotspot, and use the camera's FTP function to transfer photos from the camera to the UPHOTO cloud.

Supported cameras: 5D4, 1DX3, R5, R6/R62, R7

TIP

Automatic FTP upload transfers only photos taken after the connection is established. To upload photos taken earlier, see the manual FTP upload instructions under "Common Issues and Solutions" below.

I. Phone Settings ​

1. Check and Change the iPhone Name ​

In Settings → General → About, change "Name" to use only letters and numbers. Do not use Chinese characters, spaces or special characters. This name is also used for your Personal Hotspot. See below:

Modify phone name

2. Turn On Personal Hotspot ​

In Settings → Personal Hotspot, turn on "Allow Others to Join". See below:

Turn on personal hotspot

If a "Wi-Fi is Off" prompt appears, select "Turn on Wi-Fi". See below:

Turn on Wi-Fi

Note: Use only letters and numbers in the personal hotspot password; do not use spaces or special characters. On a 5G-capable iPhone, turn on "Maximize Compatibility". See below:

Turn on Maximize Compatibility

II. Find the FTP Server Information ​

  1. Open the UPhoto app and sign in.

  2. In the app’s album list, select the album and tap "Upload Now".

  3. On the shoot-and-upload or local upload page, select "Wireless FTP Transmission".

    Wireless FTP Transmission
  4. After selecting an upload group, open the "Shoot and Upload" screen.

    Note: The first time you use UPhoto, the app may ask to find and connect to devices on your local network. Tap "Allow". See below:

    Authorize local network devices

    The first time you open the upload screen, "FTP Service Information" appears. You will need it to configure the camera. To display it again later, tap "FTP Transfer". See below:

    FTP Service Information

    Note: If the app cannot obtain an IP address, turn Personal Hotspot off and on again. Return to the app’s album list, then reopen the FTP upload screen.

III. Camera Settings ​

  1. Set the camera’s auto power-off time to the longest available setting to keep it on.

    Find "Power saving" -> "Auto power off" in "Settings". See below:

    Auto power off
  2. Set the photo format to JPEG or JPEG+RAW.

  3. Set the camera date and time to the current date and time.

  4. Set "FTP transfer settings" (using the Canon R6 as an example).

    1. Find "Wi-Fi settings" in "Wireless features" to open it. See below:

      Wi-Fi settings
    2. Set "Wi-Fi" to "Enable". See below:

      Enable Wi-Fi
    3. Find "FTP transfer settings" in "Wi-Fi settings" to open it. See below:

      FTP transfer settings
    4. Set "Automatic transfer" to "Enable". See below:

      Automatic transfer enabled
    5. Enter "Transfer type/size", set "JPEG size to transfer" to "Larger JPEG", and set "Transfer with RAW+JPEG" to "JPEG only". See below:

      Transfer type settings
  5. Set "Wi-Fi connection".

    1. Find "Wi-Fi/Bluetooth connection" in "Wireless features" to open it. See below:

      Wi-Fi/Bluetooth connection
    2. Select "Transfer images to FTP server". See below:

      Transfer to FTP server
    3. In the "Select a device for connection" screen, select "Add a device to connect to" to open it. See below:

      Add a device
    4. In the "Setting method" screen, select "Configure online" and confirm. See below:

      Configure online
    5. On the "Select Network" screen, select the phone’s personal hotspot and confirm. See below:

      Select Network
    6. On the "Key format" screen, enter the phone’s hotspot password and confirm. See below:

      Enter Password
    7. In the "IP address set. (IPv4)" screen, select "Auto setting" and confirm. See below:

      Auto setting IP
    8. In the "Use TCP/IPv6" screen, select "Disable" and confirm. See below:

      Disable IPv6
    9. In the "FTP mode" screen, select "FTP" and confirm. See below:

      FTP mode
    10. On the "FTP server" screen, enter the app’s FTP "IP Address" in "Address setting" and its "Port" in "Port No. setting", then confirm. See below:

      FTP server setting
    11. In the "Passive mode" screen, select "Disable" and confirm. See below:

      Disable Passive mode
    12. In the "Proxy server" screen, set the "Proxy server" to "Disable" and confirm. See below:

      Disable Proxy server
    13. On the "Login method" screen, select "Login password" and confirm. Enter the username and password shown in the app’s FTP information, then confirm. See below:

      Login method
    14. In the "Target folder" screen, select "Root folder" and confirm. See below:

      Target folder
    15. If "Connected to FTP server" appears, select "OK" to return. Otherwise, check the settings above.

    • Also check whether the phone’s personal hotspot is on. If it is off, turn it on, then turn wireless FTP upload off and on again in the UPhoto app.

      Connection successful

IV. Shoot and Upload ​

Photos you take are automatically transferred to the photo list in the UPhoto app.

V. Common Issues and Solutions ​

  1. Manually select photos to upload via FTP (using the Canon R6 as an example).

    1. Find "Image transfer" in "Wireless features". See below:

      Image transfer
    2. In the "Image transfer" screen, select "Image sel./transfer" to open it. See below:

      Image sel./transfer
    3. In the "Image sel./transfer" screen, select "FTP transfer" to open it. See below:

      FTP transfer
    4. In the "Image sel./transfer" screen, select "Sel.Image" or "Multiple" to choose the photos to be uploaded, and then select "FTP transfer" to upload the photos. See below:

      Select images to upload
  2. The camera is connected, but the app cannot recognize its photos.

    • Check that the camera’s photo format is set to JPEG or JPEG+RAW.
    • Back up the memory card, then format it, take a new photo and try again. Formatting erases all data on the card.