Skip to content

[Canon] Wired Upload from an Android Phone ​

A wired connection is a simple, stable and efficient way to upload. Connect your Android phone to the camera with an OTG data cable to transfer photos to the UPHOTO cloud.

Supported cameras: 1DX, 1DX2, 1DX3, 5D2, 5D3, 5D4, 5DsR, 6D, 6D2, 60D, 7D, 7D2, R/RP, R5, R6/R62, R7

  • Other Canon cameras may also be supported; test your camera before use.

I. Phone Settings ​

  1. Configure your phone to keep the app running when the screen is off.
  2. On OPPO, vivo and OnePlus phones, enable OTG in Settings. Huawei, Xiaomi, Honor and Samsung phones do not require this step.
    • Go to Settings → Other Settings or More Settings → OTG or OTG Connection.
    • You can also search for "OTG" in Settings.

Note: If the OTG connection is idle for more than 5 minutes (10 minutes on some phones), you must enable OTG again.

II. Camera Settings ​

  1. Turn off the camera's Wi-Fi function.
    • Canon 5D4 needs to turn off the FTP function in "Communication settings", and upgrade the camera firmware to the latest version (Ver.1.0.4 and above).
  2. Set the camera’s auto power-off time to the longest available setting to keep it on. See below:
Camera Power Settings
  1. Set the photo format to JPEG or JPEG+RAW.
  2. Set the camera date and time to the current date and time.

III. Connect the Phone to the Camera ​

  1. Connect the camera and phone with the data cable.
    • If the cable has a switch, make sure it is on.
  • To purchase data cables or phone brackets, visit the "Purchase Service" section of the UPHOTO website or the "I am a photographer" WeChat Mini Program.

IV. Shoot and Upload ​

  1. Open the UPhoto app and sign in.
  2. When the permission request for "UPhoto" appears, leave the default option selected and tap "OK". See below:
UPhoto authorization request
  • If you accidentally tap "Cancel", unplug the cable from the phone and reconnect it.

Note: After connecting the phone and camera, tap "Cancel" if another app (such as Gallery or Album) asks for permission. See below:

Non-UPHOTO authorization request
  1. In the app’s album list, select the album, tap "Upload Now", and select "Wired Transmission".

Note: The first time you use the UPhoto app, you may be asked to ignore battery optimization and allow access to photos and media. Tap "Allow". See below:

Ignore battery optimization and access media permissions
Camera connected
  1. After selecting an upload group, open the "Shoot and Upload" screen. A green "Camera Connected" indicator in the upper-left corner confirms the connection; you can now take and upload photos.

Common Issues and Solutions ​

  1. Still cannot connect to the camera after multiple attempts.
    • Check that the camera and phone are connected with the data cable. If the cable has a switch, make sure it is on.
    • Swipe down from the top of the phone screen. You should see "Connected to xxxx camera". If not, the cable may be damaged; try a different cable.
    • If the cable is undamaged, leave it connected and close the apps running in the background. Open UPhoto, go to "Shoot and Upload", and tap "Manual Authorization" at the bottom of the screen. A permission request should appear after about 5 seconds.
    • Try "Clear all camera settings" or "Restore Factory Settings" in the camera settings, then reconnect.
  2. The camera is connected successfully, but the app cannot recognize the photos in the camera
    • Check that the camera’s photo format is set to JPEG or JPEG+RAW.
    • On cameras with multiple card slots, save JPEG photos to the card in slot 1.
    • Back up the memory card, then format it, take a new photo and try again. Formatting erases all data on the card.