Skip to content

[Fujifilm] Wired Upload from an Android Phone ​

A wired connection is a simple, stable and efficient way to upload. Connect your Android phone to the camera with an OTG data cable to transfer photos to the UPHOTO cloud.

I. Phone Settings ​

  1. Configure your phone to keep the app running when the screen is off.

  2. On OPPO, vivo and OnePlus phones, enable OTG in Settings. Huawei, Xiaomi, Honor and Samsung phones do not require this step.

    • Go to Settings → Other Settings or More Settings → OTG or OTG Connection.
    • You can also search for "OTG" in Settings.

    Note: If the OTG connection is idle for more than 5 minutes (10 minutes on some phones), you must enable OTG again.

II. Camera Settings ​

  1. Set the camera’s auto power-off time to the longest available setting to keep it on.
  2. Set the photo format to JPEG or JPEG+RAW.
  3. Set the camera date and time to the current date and time.
  4. Turn off camera settings such as Bluetooth, Wi-Fi, and FTP transfer (ignore if there are no related settings).
  5. Set "USB Power Supply/Setting" to "Power Off/Comm On". See below:
USB Power Supply Setting
  1. Choose an upload mode.
    • 6.1 Choose "Manual Upload" mode.

      In "Manual Upload" mode, take photos with the camera disconnected from the phone, then connect the devices and import the photos using the UPhoto app.

      • In this mode, only images on the card in slot 1 are read.

      • In this mode, the camera cannot take photos while connected to the phone. Disconnect it before shooting.

        Set "Connection Mode" to "USB Card Reader" mode. See below:

        USB Card Reader mode
    • 6.2 Choose "Shoot and Transfer" mode.

      In "Shoot and Transfer" mode, connect the camera to the phone before shooting. Each photo is automatically imported into the UPhoto app.

      • In this mode, only photos taken after connecting can be uploaded; photos taken earlier cannot be read. To upload photos taken earlier, use "Manual Upload" mode.

        Set "Connection Mode" to "USB Tether Shooting Auto"; on some models, select the equivalent USB tethered shooting automatic mode. See below:

        USB Tether mode

        Photos imported in this mode may be imported again if you switch back to "Manual Upload" mode.

III. Connect the Phone to the Camera ​

  1. Connect the camera and phone with the data cable. If the cable has a switch, make sure it is on.
    • To purchase data cables or phone brackets, visit the "Purchase Service" section of the UPHOTO website or the "I am a photographer" WeChat Mini Program.

IV. Shoot and Upload ​

  1. Open the UPhoto app and sign in.

  2. When the permission request for "UPhoto" appears, leave the default option selected and tap "OK". See below:

    App permission request

    If you accidentally tap "Cancel", unplug the cable from the phone and reconnect it.

    Note: After connecting the phone and camera, tap "Cancel" if another app (such as Gallery or Album) asks for permission. See below:

    Non-UPHOTO authorization
  3. In the app’s album list, select the album, tap "Upload Now", and select "Wired Transmission".

    Note: The first time you use the UPhoto app, you may be asked to ignore battery optimization and allow access to photos and media. Tap "Allow". See below:

    Ignore battery optimization and access permissions
    Camera connected
  4. After selecting an upload group, open the "Shoot and Upload" screen. A green "Camera Connected" indicator in the upper-left corner confirms the connection; you can now take and upload photos.

Common Issues and Solutions ​

  1. Still cannot connect to the camera after multiple attempts.

    • Check that the camera and phone are connected with the data cable. If the cable has a switch, make sure it is on.
    • Swipe down from the top of the phone screen. You should see "Connected to xxxx camera". If not, the cable may be damaged; try a different cable.
    • If the cable is undamaged, leave it connected and close the apps running in the background. Open UPhoto, go to "Shoot and Upload", and tap "Manual Authorization" at the bottom of the screen. A permission request should appear after about 5 seconds.
    • Try "Clear all camera settings" or "Restore Factory Settings" in the camera settings, then reconnect.
  2. The camera is connected, but the app cannot recognize its photos.

    • Check that the camera’s photo format is set to JPEG or JPEG+RAW.
    • On cameras with multiple card slots, save JPEG photos to the card in slot 1.
    • Back up the memory card, then format it, take a new photo and try again. Formatting erases all data on the card.